Glossary
C
Back to the glossary
Continuous Insulation

What It Means

Continuous insulation, often written CI, is insulation that runs without interruption across structural members such as studs, girts, and floor edges. The only breaks are fasteners and service openings. ASHRAE 90.1 defines it this way, and energy codes use the same idea. CI can sit on the exterior, the interior, or within the assembly, but exterior CI is most common in commercial walls.

Why It Matters

Insulation placed between studs loses much of its value because the studs conduct heat around it. Steel studs are especially conductive. A continuous layer outside the framing covers those thermal bridges, so the wall performs closer to its rated value. CI also keeps the sheathing warmer, which lowers the risk of condensation inside the wall.

Best Practices

Real-World Use

Exterior mineral wool or rigid foam boards behind rainscreen cladding are a common commercial CI approach. In masonry veneer walls, the brick ties and shelf angles pass through the CI, so designers use offset brackets or thermally broken supports to keep heat loss down.

Limitations

In Simple Terms

Continuous insulation is a blanket wrapped around the outside of the frame instead of stuffed between the boards, so the cold can’t sneak through the framing.

Go Deeper

For more details, check our blogs. For design guidance on CI in walls, see Maximizing Energy Efficiency with Continuous Insulation in Building Design. For supporting masonry through CI, see Masonry Offset Bracket Solutions for Continuous Insulation and Support.


How D.TO Helps

Continuous insulation only pays off when it stays continuous at slab edges, openings, and cladding supports. D.TO supports teams in carrying the insulation strategy through those conditions while the details are drawn, which helps the envelope perform closer to what the energy model assumed.

See how D.TO fits into your daily design workflow on the key features page, or schedule a demo to explore it in more detail.